Skip to main content

In the Fermentor: Flaming Pumpkin

I'll admit that I'm not a huge Pumpkin Beer fan. I didn't have one on my brewing calendar for this year and didn't have my sights set on one for next Fall either. Then my niece came along and threw down the gauntlet. She asked me to brew her a pumpkin beer and I accepted the challenge.

I did a lot of reading to see how to best go about using pumpkin in beer. Some people mash it with the grains. Others add it to the brew kettle during the boil. Some add it to the primary or secondary fermentor. The consensus from professional brewers appears to be adding it to the mash, so I took the same approach. The pumpkin was cooked ahead of time by my girlfriend to soften it, convert some of the starch and help release some of its sugars. It then joined the grains in the mash.

I really want the pumpkin pie effect here, so I've thrown in all of the requisite spices toward the end of the boil. I've also gone with just enough bitterness to balance the sweetness of the rest of the beer. Finally, I prepared the brown sugar in the same manner as the Candi Sugar in my Quad. With approximately 45 min left in the boil, I heated the brown sugar in a small pot with enough water to make a syrup. I tossed in a little cream of tartar and boiled the sugar over medium heat between 260-275F. I kept the sugar cooking until there was roughly 5 minutes left in the boil of the wort. I then slowly poured the hot sugar into the brew-pot.

If everything precedes as planned, this beer should be ready just in time for Halloween. How appropriate. Here's the full recipe:

Grains:
8 lbs Colorado Pale Ale
8 oz Carastan
8 oz Extra Dark Crystal

Hops:
0.5 oz Newport (9.8% a.a.): 60 min

Yeast:
Safale US-05

Extras:
3 lbs Fresh Pumpkin: Mash
1 lb Dark Brown Sugar: 5 min
1 Tbsp Cinnamon: 10 min
1 Tbsp Finely Chopped Ginger: 10 min
2 tsp Allspice: 10 min
2 tsp Clove: 10 min
2 tsp Nutmeg: 10 min

Mash Schedule:
Saccharification Rest: 151F for 75 min
Mashout: 168F for 15 minutes

Original Gravity:
1.057
Estimated Final Gravity:
1.012

IBU: 19
SRM Color: 17

Fermentation Schedule:
3 Weeks Primary
2 Weeks Bottle Conditioning

Cost: $15 per case
Commercial Equivalent: Samuel Adams Harvest Pumpkin: $32
Savings: $17

Labels:

Comments

  1. Colorado Kitchen BrewOctober 6, 2012 at 10:37 AM

    Check back on Halloween night and you'll be able to read about how it turns out.

    ReplyDelete
  2. BloggerOctober 7, 2012 at 4:58 PM

    Did you use a pie pumpkin or regular carving pumpkin?

    ReplyDelete
  3. Colorado Kitchen BrewOctober 7, 2012 at 8:52 PM

    I used pie pumpkins. Two small ones should net you enough for this recipe.

    ReplyDelete
  4. AnonymousOctober 24, 2012 at 6:30 PM

    My pumpkin ale this year was named "Drowning Pumpkin" because of the fact that I flooded my bathroom during the boil =p Anyone out there want to make a Windy Pumpkin or an Earthy pumpkin???

    ReplyDelete

Post a Comment

Popular posts from this blog

Out of the Bottle: Oak Aged La Petite Orange

I said in my previous post that I'd saved some of Northern Brewer's La Petite Orange kit to age with Sherry Infused Oak Cubes. The aged beer is ready to go, so let's see what the Oak and Sherry did. I've had more than a few Barrel Aged beers that were completely dominated by the wood and whatever alcohol (Rum, Bourbon, Sherry, etc) the barrel originally contained. In my beer, the oak and sherry are subtle. That's what I was shooting for, so I'm quite happy with that. The flavors and aromas from the original beer are still present. There's no point in revisiting them. What I really care about is the changes the wood made. Vanilla is the most significant contribution. There's also a very mild almond note at work. The Sherry really cuts through in the aroma. It provides an extra helping of dark fruits, plus a little more alcohol heat. The beer is definitely more wine-like than before. On a side note, I took my own advice and bumped the priming su
Post a Comment
Read more

Out of the Bottle: Big Beers and a Haze

I'm doing a 4-for-1 with this installment, and will be bundling my finished beers going forward, rather than writing a blog for each.  That should leave me space for more brewing oriented posts. This month, I've got beers I posted the recipes for back in November, December and January. First out of the gate is Enchanted Nightmare Imperial Stout. This beer is an amalgamation of extra grains and hops I had that were combined with some 2-Row and additional hops to create a 9.95% ABV Stout for the depths of Winter. So what if it wasn't actually ready until the Spring Equinox arrived? A beer like this can't be rushed. My beer pours nearly pitch black, and has nice ruby highlights. The head could stand a touch more staying power, but is appropriately dense. In the mouth, the body is a little lighter than I expected. The carbonation is very soft, and feels just about right for this beer style.  When I bottled this beer, I was slightly worried that the whiskey and oak were a li
Post a Comment
Read more

Kitchen Brewing Part 3: Sparge and Boil

The mash emerges from the oven. Now that we're finished with Part 1 and Part 2 of this series, it's time to Sparge. As you can see from the photo, the grains have absorbed a lot of liquid. In a traditional all-grain setup, your Mash Tun has a valve at the bottom to release the first running of Wort. The grains are then rinsed with the sparge water to extract any remaining sugars. My stove-top method doesn't afford such luxury, so a different method is called for. The grains have gained a little weight. There are a couple of choices at this point. One choice is to lift the grain bag out of Pot A and place it into the sparge water in Pot B to steep for 10-15 minutes or more. The other is to lift the grain bag up, put a colander under it and slowly pour the sparge water through the grains into the original pot. I prefer the former, because I get a better extraction rate from my grains. All that absorption means that the grains weigh a lot more than they did going i
2 comments
Read more